Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the bolts securing the reservoir tank to the radiator fan shroud. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Insert the over flow hose (A) connected to the radiator filler neck into the reservoir tank.
|
Inspection
1. Check that the reservoir tank does not have deformation, cracks or damage.2. Make sure the over flow hoses are not cracked, damaged or loose.3. Make sure the engine coolant level is between “ ...
Thermostat
...
Other materials:
Inspection
1. Check the illumination operation when battery voltage is applied between the connector terminals.Terminal No.Inspection conditionsSpecification2 (+) — 6 (−)Apply battery voltage.Light ON2. If it does not operate normally, replace the heater control assembly. ...
© 2017-2024 Copyright www.sulegacy.com
