Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. RADIATOR FAN CONTROL MODULE (MAIN)

1. Install the radiator fan control module (main), and install the bolts securing the radiator fan control module (main).

Tightening torque:

2.6 N·m (0.3 kgf-m, 1.9 ft-lb)

2. Connect the radiator fan harness connector (A) and radiator main fan motor connector (B) to the radiator fan control module (main).

3. Install the air intake duct. Air Intake Duct > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

5. Install the collector cover.

2. RADIATOR FAN CONTROL MODULE (SUB)

1. Install the radiator fan control module (sub), and install the bolts securing the radiator fan control module (sub).

Tightening torque:

2.6 N·m (0.3 kgf-m, 1.9 ft-lb)

2. Connect the radiator fan harness connector (A) and radiator sub fan motor connector (B) to the radiator fan control module (sub).

3. Install the air intake duct. Air Intake Duct > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Removal
1. RADIATOR FAN CONTROL MODULE (MAIN)1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two posi ...

Radiator fan system
...

Other materials:

Dtc b11e0 rollover deployment history
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:This DTC is indicated when the curtain airbag module and the seat belt pretensioner are deployed.Once this DTC is displayed, the memory cannot be cleared. Replace the following parts.• Airbag control module Air ...

© 2017-2024 Copyright www.sulegacy.com