1. Install the water pump to the oil pan upper, and tighten the bolts in the numerical order as shown in the figure. NOTE: Use a new gasket. Tightening torque: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) 2. Install the timing chain assembly. Timing Chain Assembly > INSTALLATION 3. Install the chain cover. Chain Cover > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE 5. Fill engine coolant. Engine Coolant > REPLACEMENT 6. Install the collector cover. |
Inspection
1. INSPECTION WHEN LOW ENGINE OIL WARNING LIGHT ILLUMINATES ON LCDSTEPCHECKYESNO1.CHECK ENGINE OIL LEVEL.Is engine oil level normal- Oil Level Switch > INSPECTIONReplace engine oil or refill, and check again while the oil level is normal condition. Engine Oil > REPLACEMENTTo disable the low engine ...