Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Noise suppressor / Installation

1. Install the noise suppressor assembly.

Tightening torque:

12±3 N·m (1.2±0.3 kgf-m, 8.9±2.2 ft-lb)

2. Install the trim panel - rear pillar UPR. (Sedan model) Rear Quarter Trim > INSTALLATION

3. Install the trim panel - rear gate. (OUTBACK model) Rear Gate Trim > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - rear pillar UPR. Rear Quarter Trim > RE ...

Power amplifier

...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the bulb socket and back-up light bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. OUTBACK MODE ...