Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the socket assembly. NOTE: Align the groove of the console box assembly or the trim panel - rear apron LH with the claw of the socket assembly. 2. Install the cover assembly - front console box assembly. (Console type) Tightening torque: 6.5 N·m (0.6 kgf-m, 4.8 ft-lb) 3. Install the trim panel - rear apron LH. (Luggage room type) 4. Connect the ground terminal to battery sensor. NOTE |
Wiring diagram
Refer to “Rear Accessory Power Supply Socket System” in the wiring diagram. Rear Accessory Power Supply Socket System > WIRING DIAGRAM ...
Removal
1. CONSOLE1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - front and the console box assembly. Con ...
Other materials:
Installation
1. Before installation, check the following items.• Lever is free from deformation.• Grease is applied sufficiently to lever joints.If grease is insufficient, add it as necessary before assembling.2. Install the frame assembly - rear door outer.Preparation tool:TORX® T30Tightening torqu ...
© 2017-2024 Copyright www.sulegacy.com
