Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. SEDAN MODEL 1. Install the rearview camera assembly. 2. Install the garnish - trunk. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 3. Install the trim panel - trunk lid. 4. Connect the ground terminal to battery sensor. NOTE 5. Confirm the marker position. Rearview Camera System > INSPECTION 2. OUTBACK MODEL 1. Install the rearview camera assembly. 2. Install the garnish assembly - rear gate. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 3. Install the trim panel - rear gate. 4. Connect the ground terminal to battery sensor. NOTE 5. Confirm the marker position. Rearview Camera System > INSPECTION |
Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the garnish - trunk. Trunk Lid Garnish > REMOVAL4. ...
Relay and fuse
...
Other materials:
Assembly
1. RADIATOR MAIN FAN AND RADIATOR MAIN FAN MOTOR1. Install the radiator main fan motor to the radiator fan shroud.Tightening torque:3.9 N·m (0.4 kgf-m, 2.9 ft-lb)2. Install the radiator main fan to the radiator main fan motor.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)3. Install t ...
