CAUTION: • If the sealing cover - front door gets broken, replace it with a new part. • Apply a uniform bead of butyl tape. • Attach the sealing cover - front door, keeping it from becoming wrinkled. • Breaks in the bead will allow water leakage and contamination. 1. Install the sealing cover - front door. (1) Forcefully push the butyl tape portion to prevent any floating on surface. (2) When replacing the sealing cover, use the butyl tape. Butyl tape: 3M Butyl Tape 8626 or equivalent 2. Install the trim panel - front door. Door Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Removal
1. Lift up the vehicle, and then remove the front wheels.2. Remove the ball joint.(1) Extract the cotter pin (a) from the ball stud.(2) Remove the castle nut (b).(3) Extract the ball stud from the front arm (c).(4) Remove the bolt securing the ball joint to the housing assembly - front axle.CAUTION: ...