Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Exterior interior trim / Assist grip / Installation

1. Pinch the metal clip with pliers, and remove it from the assist grip BRKT.

2. Install the metal clip to the assist grip side.

3. Install the cap to the assist grip.

NOTE:

If the metal clip is not inserted to the end, the cap cannot be installed.

4. Install the assist grip to the vehicle.

Removal

1. Pull up the cap (b) while pulling the knob (a) toward you with a flat tip screwdriver or similar tool wrapped with a protection tape.2. Pull the assist grip toward yourself (toward the vehicle cent ...

Center console

...

Other materials:

Dtc p2101 throttle actuator "a" control motor circuit range/performance
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performance• Engine stalls.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PRO ...