Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
CAUTION: • Make sure that packings are attached on the clips of the roof spoiler assembly. If a gasket is not attached, water leakage may occur. • Connect the connector of the light assembly - high-mounted securely. 1. Install the roof spoiler. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the drip - rear gate. (Except for model with power rear gate) 3. Install the trim panel - rear gate UPR and the trim panel - rear gate pillar side. Rear Gate Trim > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear gate UPR and the trim panel - rear gate pillar side. Rear Gate Trim > REMOVAL3. Remove the drip - rear gate ...
Roof trim
...
Other materials:
Read diagnostic trouble code (dtc) operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System Check».4. On «Select System» display, select «Power Steering».5. On «Select Function» display, select «D ...
