CAUTION: Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur. 1. Install the garnish - trunk. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 2. Install the trim panel - trunk lid. 3. Connect the ground terminal to battery sensor. NOTE |
Dtc p0500 vehicle speed sensor "a" circuit
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:VDC does not operate.STEPCHECKYESNO1.CHECK DTC.Read the DTC of VDC system using the Subaru Select Monitor.Is DTC displayed-Perform the diagnosis according to DTC. List of Diagnostic Trouble Code (DTC)Repair the poor contact of ...