Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight / Switches and harness / Installation

1. PRE-COLLISION BRAKE OFF SWITCH/LANE DEPARTURE WARNING OFF SWITCH

1. Install the pre-collision brake OFF switch or the lane departure warning OFF switch.

2. Install the cover assembly - instrument panel LWR driver.

3. Connect the ground terminal to battery sensor. NOTE

2. EyeSight STEERING SWITCH

NOTE:

For the operation procedures for the EyeSight steering switch, refer to “CRUISE CONTROL SYSTEM” section. Cruise Control Command Switch > INSTALLATION

Inspection

1. PRE-COLLISION BRAKE OFF SWITCH/LANE DEPARTURE WARNING OFF SWITCH1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 8 ...

Front suspension

...

Other materials:

Component
1. ABS WHEEL SPEED SENSOR(1)Front ABS wheel speed sensor(5)Housing ASSY - rear axleTightening torque: N·m (kgf-m, ft-lb)(2)Housing ASSY - front axle(6)Magnetic encoderT:7.5 (0.8, 5.5)(3)Rear ABS wheel speed sensor (sedan model)(7)Hub unit COMPL (4)Rear ABS wheel speed sensor (OUTBACK model) ...