1. Install the crankshaft position sensor to the cylinder block, and connect the connector to the crankshaft position sensor. Tightening torque: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) 2. Install the air intake boot. Air Intake Boot > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Installation
1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to cable joints.If grease is insufficient, add it as necessary before assembling the cable.2. Install the remote assembly - door.3. Install the trim panel - fr ...