Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h4do) / Engine oil temperature sensor / Installation

1. Install the engine oil temperature sensor to the chain cover, and connect the connector to the engine oil temperature sensor.

NOTE:

Use a new gasket.

Tightening torque:

18 N·m (1.8 kgf-m, 13.3 ft-lb)

2. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the engine oil temperature sensor has no deformation, cracks or other damages.2. Immerse the engine oil temperature sensor and a thermometer in water.CAUTION:Take care not to allow water ...

Engine wiring harness

...

Other materials:

Basic diagnostic procedure procedure
CAUTION:• When performing diagnosis, observe the legal speed limit on the road.• The cancel code will also appear when the cruise control is cancelled by the driver’s operation. Do not confuse them.• Be sure to get an assistant to support the diagnosis while driving, and have ...