1. Install the manifold absolute pressure sensor to the intake manifold assembly, and connect the connector to the manifold absolute pressure sensor. NOTE: Use new O-rings. Tightening torque: 3.4 N·m (0.3 kgf-m, 2.5 ft-lb) 2. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. KEYLESS ACCESS WITH PUSH BUTTON START SYSTEMRefer to “Basic Diagnostic Procedure” of “KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)” section. Basic Diagnostic Procedure2. PUSH BUTTON START SYSTEMIgnition/ACC change function check1. Check push button ignition ...