Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h4do) / Oil control solenoid / Installation

1. Install the intake oil control solenoid to the chain cover, and connect the connector to the intake oil control solenoid.

NOTE:

• Use new O-rings.

• Apply engine oil to O-ring.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

2. Install the air intake duct. (RH side only) Air Intake Duct > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the oil control solenoid has no deformation, cracks or other damages.2. Measure the resistance between the oil control solenoid terminals.Terminal No.Standard1 and 27.25±0.4 - (when 20& ...

Rear oxygen sensor

...

Other materials:

Dtc u1433 invalid data received from eyesight
NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG when data received from the stereo camera is not normal.2. EXECUTION CONDITIONSecondary ParametersExecu ...