CAUTION: If lubricant is spilt over the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire. 1. Before installing rear oxygen sensor, apply the anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier. CAUTION: Never apply anti-seize compound to the protector of rear oxygen sensor. Anti-seize compound: NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent 2. Install the rear oxygen sensor. Tightening torque: 21 N·m (2.1 kgf-m, 15.5 ft-lb) 3. Install the front mud guard RH. Mud Guard > INSTALLATION 4. Connect the rear oxygen sensor connector. NOTE: Be careful not to allow the rear oxygen sensor harness to interfere with the sensor unit and the front oxygen (A/F) sensor harness.
5. Install the under cover. Front Under Cover > INSTALLATION 6. Lower the vehicle. 7. Connect the ground terminal to battery sensor. NOTE |
Disassembly
CAUTION:Be careful not to allow foreign matter to enter the brake hose connector.1. Remove mud and foreign matter from the caliper body assembly.2. Remove the piston - disc brake.(1) Place a wooden block in the caliper body as shown in the figure to prevent the piston - disc brake from jumping out a ...