Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. INTAKE SIDE

1. Install the camshaft position sensor, and connect the connector to the camshaft position sensor.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

2. Install the fuel injector. Fuel Injector > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

4. Install the collector cover.

2. EXHAUST SIDE

1. Install the camshaft position sensor, and connect the connector to the camshaft position sensor.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

2. Install the under cover. Front Under Cover > INSTALLATION

3. Lower the vehicle.

4. Connect the ground terminal to battery sensor. NOTE

Inspection
1. CAMSHAFT POSITION SENSOR1. Disconnect the ground terminal from battery sensor. NOTE2. Prepare an oscilloscope.3. While pressing the section (A) shown in the figure, move the lock lever (B) in the ...

Crankshaft position sensor
...

Other materials:

Disassembly
1. BUSHING FRONT - FRONT ARM1. Put an alignment mark on the front arm assembly based on the split portion of the bushing intermediate plate of the busing front - front arm.CAUTION:Always put an alignment mark for aligning the position on bushing installation.(1)Put an alignment mark.(2)Gap of bushin ...

© 2017-2024 Copyright www.sulegacy.com