1. Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor. NOTE: Use a new gasket. Tightening torque: 22 N·m (2.2 kgf-m, 16.2 ft-lb) 2. Connect the ground terminal to battery sensor. NOTE 3. Fill engine coolant. Engine Coolant > REPLACEMENT 4. Install the collector cover. |
Dtc p0304 cylinder 4 misfire detected
DTC DETECTING CONDITION:• Detected when two consecutive driving cycles with fault occur.• Immediately at fault recognition (A misfire which could damage catalyst occurs.)TROUBLE SYMPTOM:• Engine stalls.• Improper idling• Rough drivingCAUTION:After servicing or replacing ...