CAUTION: If lubricant is spilt over the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire. 1. Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next removal easier. CAUTION: Never apply anti-seize compound to the protector of front oxygen (A/F) sensor. Anti-seize compound: NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent 2. Install the front oxygen (A/F) sensor. Tightening torque: 21 N·m (2.1 kgf-m, 15.5 ft-lb) 3. Connect the connector (A) of front oxygen (A/F) sensor. 4. Install the clip (B) securing the front oxygen (A/F) sensor harness. (LH side only) • RH side • LH side 5. Lower the vehicle. 6. Connect the ground terminal to battery sensor. NOTE |
Trunk lid (Legacy) - if the trunk lid cannot be opened
NOTE
If you open the trunk lid with a key
while the alarm system is armed, the
alarm system is triggered and the
vehicle's horn sounds. In this case,
perform any of the following operations.
Press any button on the remote
transmitter.
Insert the key into the ignition
switc ...