1. Connect the connector to the fuel pump control module. 2. Install the fuel pump control module. Tightening torque: 5 N·m (0.5 kgf-m, 3.7 ft-lb) 3. Install the trunk trim panel assembly - side on RH side. (Sedan model) Rear Quarter Trim > INSTALLATION 4. Install the right side rear quarter trim. (OUTBACK model) Rear Quarter Trim > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF, and wait until the engine cools.3. Remove the oil level gauge and wipe it clean.4. Reinsert the oil level gauge all the way. Be sure that the oil level gauge is correctly inserted in the proper direction.5. Pull out the oil l ...