Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. INTAKE SIDE 1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve. Tightening torque: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) 2. Connect the ground terminal to battery sensor. NOTE 3. Install the collector cover. 2. EXHAUST SIDE 1. Install the exhaust oil flow control solenoid valve, and connect the connector to the exhaust oil flow control solenoid valve. Tightening torque: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) 2. Install the under cover. Front Under Cover > INSTALLATION 3. Lower the vehicle. 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Check that the oil flow control solenoid valve has no deformation, cracks or other damages.2. Measure the resistance between the oil control solenoid terminals.Terminal No.Standard1 and 27.4±0.5 - ...
Other materials:
Handling of the sonar sensors
The 4 sonar sensors are located in the
rear bumper. To ensure the proper operation
of the Reverse Automatic Braking
system, observe the following precautions.
Do not affix any stickers or other items
on the bumper surface near the sonar
sensors.
Always keep the rear bumper sur ...
