Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. Install the throttle body to the intake manifold.

NOTE:

Use a new gasket.

Tightening torque:

8 N·m (0.8 kgf-m, 5.9 ft-lb)

2. Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.

3. Install the air intake boot. Air Intake Boot > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

5. Fill engine coolant. Engine Coolant > REPLACEMENT

6. Install the collector cover.

Inspection
1. THROTTLE SENSOR (METHOD WITH CIRCUIT TESTER)1. Disconnect the ground terminal from battery sensor. NOTE2. While pressing the section (A) shown in the figure, move the lock lever (B) in the directi ...

Hvac system (diagnostics)
...

Other materials:

Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS18360AA040HANGER• Used for removing and installing EGR cooler.• Used together with BOLT (18363AA050).18363AA050BOLT• Used for removing and installing EGR cooler.• Used together with HANGER (18360AA040).41099AJ130SPECIAL ...

© 2017-2024 Copyright www.sulegacy.com