CAUTION: • Do not start the engine before charging refrigerant. • If the engine is started with no refrigerant charge, replace the compressor assembly. • Replace O-rings and pipe clamps with new parts and install securely. • Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Install the blower motor unit assembly. 2. Install the heater and cooling unit assembly. Heater and Cooling Unit > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Inspection locations after a collision inspection
If the vehicle is involved in a collision, even if it is a slight collision, be sure to check the following systems.1. DRIVER’S AIRBAG MODULE ASSEMBLY1. Frontal collision (driver’s airbag module assembly activated)(1) Replace the following parts with new ones.• Airbag control modul ...