Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
CAUTION: • Do not start the engine before charging refrigerant. • If the engine is started with no refrigerant charge, replace the compressor assembly. • Replace O-rings and pipe clamps with new parts and install securely. • Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Attach the heater core. (1) Install the heater pipe clamp. (2) Install the heater pipe cover. (3) Install the duct - foot driver. 2. Install the heater and cooling unit assembly. Heater and Cooling Unit > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Removal
CAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION1. Disconnect th ...
Heater duct
...
Other materials:
System alarm operation
The alarm system will give the following
alarms when triggered.
The vehicle's horn will sound for 30
seconds.
The hazard warning flashers will flash
for 30 seconds.
If any of the doors (or the rear gate/trunk
lid) remains open after the 30-second
period, the horn will con ...
