Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Rear vent door actuator / Installation

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION

1. Install the motor assembly - rear heater.

2. Install the duct - foot assist.

3. Install the instrument panel assembly and the beam COMPL - steering. Instrument Panel Assembly > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Inspection

1. ACTUATOR LINK1. Visually check the operating range of the link, and remove the foreign matter if any.2. Operate the temperature control switch, and check that the link operates normally.3. If it do ...

Refrigerant pressure with manifold gauge set

...

Other materials:

Inspection
1. Check the motor operation when battery voltage is applied between the connector terminals.Terminal No.Inspection conditionsSpecification2 (+) — 1 (−)Apply battery voltage.Rotation2. If the blower motor does not operate normally, replace the blower motor. ...