Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Back-up light bulb / Installation

1. SEDAN MODEL

1. Install the back-up light bulb.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the trim panel - trunk lid.

3. Connect the ground terminal to battery sensor. NOTE

2. OUTBACK MODEL

1. Install the back-up light bulb.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the bulb inspection cover.

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the bulb socket and back-up light bulb.CAUTION:Use a ...

Back-up light system

...

Other materials:

Inspection
1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages.2. Immerse the engine coolant temperature sensor and a thermometer in water.CAUTION:Take care not to allow water to get into the engine coolant temperature sensor connector. Completely remove any water in ...