1. Install the bulb and light assembly - door step. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Connect the ground terminal to battery sensor. NOTE |
Dtc b1877 short in front seat cushion airbag lh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in front seat cushion airbag LH, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAU ...