Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. SEDAN MODEL 1. Install the light assembly - high-mounted. 2. Install the trim panel assembly - rear shelf. Rear Shelf Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL CAUTION: Make sure the bolt is tightened securely because improper roof spoiler installation may cause water leakage. 1. Install the light assembly - high-mounted. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 2. Install the roof spoiler. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 3. Install the trim panel - rear gate. 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Apply battery voltage between the connector terminals to check the lighting condition of the light.• Sedan modelTerminal No.Inspection conditionsSpecification1 (+) — 2 (−)Apply batter ...
Other materials:
Front seatbelt pretensioners
The driver's and front passenger's seatbelts
have a seatbelt pretensioner. The
seatbelt pretensioners are designed to be
activated in the event of an accident
involving moderate to severe frontal and
side collisions and rollover accidents.
The following sensors serve as sensors
for the pr ...
