1. GLOVE BOX LIGHT 1. Install the light - pocket. 2. Install the light - pocket cover. 3. Install the pocket assembly. 4. Connect the ground terminal to battery sensor. NOTE 2. POCKET LIGHT 1. Install the light - pocket. 2. Install the heater control assembly. 3. Connect the ground terminal to battery sensor. NOTE 3. DOOR POCKET LIGHT 1. Install the light - door pocket. 2. Install the trim panel - front door. Door Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Installation
1. Install the throttle body to the intake manifold.NOTE:Use a new gasket.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.3. Install the air intake boot. Air Intake Boot > INST ...