1. SEDAN MODEL 1. Install the license plate light bulb. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Install the license plate light. 3. Install the garnish - trunk. Trunk Lid Garnish > INSTALLATION Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 4. Install the trim panel - trunk lid. 5. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL 1. Install the license plate light bulb. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Install the license plate light. 3. Connect the ground terminal to battery sensor. NOTE |
Installation
1. CROSSMEMBER AND CUSHION RUBBER1. Install the transmission cushion rubber to the transmission, and tighten the bolt (A).2. Install the transmission cushion rubber to the center crossmember, and temporarily tighten the nut (B).Tightening torque:Bolt (A)35 N·m (3.6 kgf-m, 25.8 ft-lb)3. Instal ...