1. SEDAN MODEL 1. Replace the light assembly gasket with a new part. 2. Install the rear finisher light assembly. 3. Install the garnish - trunk. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 4. Install the trim panel - trunk lid. 5. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL 1. Replace the light assembly gasket with a new part. 2. Install the rear finisher light assembly. 3. Install the garnish assembly - rear gate. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 4. Install the trim panel - rear gate. 5. Connect the ground terminal to battery sensor. NOTE |
Selecting a station from the list (if equipped)
A station list can be displayed.
Touch the tab
Touch the tab and the
station list will
appear.
Select the desired station.
Update the station list
Touch the "Update Station List" key on the
station list screen and the following screen
will be displayed. ...