Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Rear side marker light bulb / Installation

1. SEDAN MODEL

1. Install the rear side marker light bulb. Rear Combination Light Assembly > ASSEMBLY

2. Install the trunk trim panel - side.

3. Connect the ground terminal to battery sensor. NOTE

2. OUTBACK MODEL

1. Install the rear side marker light bulb. Rear Combination Light Assembly > ASSEMBLY

2. Install the light assembly - rear combination.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk trim panel - side. Trunk Room Trim > REMOVAL3. Remove the rear side marker light bulb. Rear Combination ...

Rear turn signal light bulb

...

Other materials:

Dtc p013e o2 sensor delayed response - rich to lean bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSISDetect the delayed response of rear oxygen sensor output for rich > lean.After the deceleration fue ...