Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. SEDAN MODEL 1. Install the rear turn signal light bulb. Rear Combination Light Assembly > ASSEMBLY 2. Install the trunk trim panel - side. 3. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL 1. Install the rear turn signal light bulb. Rear Combination Light Assembly > ASSEMBLY 2. Install the light assembly - rear combination. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 3. Connect the ground terminal to battery sensor. NOTE |
Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk trim panel - side. Trunk Room Trim > REMOVAL3. Remove the rear turn signal light bulb. Rear Combination ...
Reflex reflector
...
Other materials:
Caution
• When performing any work, always wear work clothes, a work cap and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary.• When performing a repair, identify the cause of trouble and avoid unnecessary removal, disassembly and replacement.• Some vehi ...
