Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Spot map light / Installation

1. Install the spot map light cover and bulb.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the overhead console. (Models without EyeSight)

3. Install the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard5 — 6Switch OFF1 M- or moreSwitch ONApprox. 18 -2. Replace the overhead ...

Srf off switch

...

Other materials:

Inspection
1. Check that the thermostat does not have deformation, cracks or damage.2. Check that the thermostat valve closes completely at an ambient temperature.3. Immerse the thermostat and a thermometer in water. Raise water temperature gradually, and check the temperature and valve lift when the valve beg ...