Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Trunk room light / Installation

1. Install the bulb and bulb cover.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the light assembly - trunk room.

3. Connect the ground terminal to battery sensor. NOTE

Removal

NOTE:Do not remove the trunk room light if removing the bulb only.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - trunk room.(1) Release the claws.(2) Discon ...

Turn signal light and hazard light system

...

Other materials:

Dtc b1440 air mix door actuator circuit open (driver)
DTC DETECTING CONDITION:Air mix door actuator potentiometer circuit is open.TROUBLE SYMPTOM:• Temperature cannot be adjusted.• Temperature of the driver’s side cannot be adjusted for model with left/right independent air conditioner.WIRING DIAGRAM:Air conditioning system Air Condi ...