1. OIL FILTER CAUTION: Do not tighten excessively, or oil may leak. 1. Clean the oil filter installing surface on the chain cover. 2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber. 3. Install the oil filter by turning it by hand, being careful not to damage the seal rubber of the oil filter. 4. Tighten further (approx. 7/8 turn) after the seal rubber contacts the chain cover. When using a torque wrench, tighten it to 12 N·m (1.2 kgf-m, 8.9 ft-lb). 5. After installing, check the engine oil level and replenish it if necessary. Engine Oil > INSPECTION 2. OIL PUMP UNION 1. Install the oil pump union to the chain cover. Tightening torque: 45 N·m (4.6 kgf-m, 33.2 ft-lb) 2. Install the oil filter. Engine Oil Filter > INSTALLATION |
Basic diagnostic procedure procedure
STEPCHECKYESNO1.CHECK PRE-INSPECTION.1) Ask the customer when and how the trouble occurred using the interview check list. Check List for Interview2) Before performing diagnostics, check the following items which might affect CVT problems.• General inspection General Description > INSPECTION ...