Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Apply liquid gasket to the oil pressure switch threads. Liquid gasket: THREE BOND 1324 (Part No. 004403042) or equivalent
2. Install the oil pressure switch to the oil pan upper. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 3. Connect the terminal to the oil pressure switch. 4. Install the under cover. Front Under Cover > INSTALLATION 5. Lower the vehicle. 6. Connect the ground terminal to battery sensor. NOTE 7. Refill the engine oil. Engine Oil > REPLACEMENT |
Inspection
1. Check that the oil pressure switch does not have deformation, cracks or damage.2. Check the oil pressure switch installation portion for oil leakage and oil seepage. ...
Other materials:
Disassembly
1. Using the ST, remove the ball bearing (large) from transfer reduction driven gear.ST1 899864100REMOVERST2 398497701SEATST3 498077600REMOVER2. Using the ST, remove the ball bearing (small) from transfer reduction driven gear.ST1 899864100REMOVERST2 398497701SEATST3 18720AA000REMO ...
