1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH 1. Install the back-up light switch & neutral position switch with the harness. NOTE: Use a new gasket. Tightening torque: 32.3 N·m (3.3 kgf-m, 23.8 ft-lb)
2. Lower the vehicle. 3. Connect the connectors of back-up light switch & neutral position switch. 4. Install the air intake boot. Air Intake Boot > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE |
Dtc c1362 normal closing valve 2
DTC DETECTING CONDITION:A fault is detected if electrical malfunction judgment is generated for VDCH/U solenoid valve.TROUBLE SYMPTOM:• ABS does not operate.• EBD does not operate.• VDC does not operate.• Hill hold does not function.• EyeSight does not operate. (Models ...