1. Install the cam sprocket. 2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt. Tightening torque: Tighten to a torque of 29.5 N·m (3.0 kgf-m, 21.8 ft-lb), and then tighten further by 45°.
• IN side • EX side 3. Install the timing chain assembly. Timing Chain Assembly > INSTALLATION 4. Install the chain cover. Chain Cover > INSTALLATION 5. Install the crank pulley. Crank Pulley > INSTALLATION 6. Install the V-belts. V-belt > INSTALLATION |
Removal
1. Raise the glass assembly - front door to the top position.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE3. Remove the trim panel - front door. Door Trim > REMOVAL4. Remove the sealing cover - front door. Front Sealing Cove ...