1. Install the power rear gate auto closer. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 2. Install the trim panel - rear gate. 3. Connect the ground terminal to battery sensor. NOTE |
Rear gate (Outback) - if the rear gate cannot be opened
In the event that you cannot open the rear
gate by pressing the rear gate opener
button (all models) or using the power rear
gate (if equipped), you can open it from
inside the cargo area.
Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver. ...