CAUTION: • For parts which are not reusable, always use new parts. • Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground. 1. Install the trailing link. Tightening torque: Trailing link — rear sub frame assembly: 120 N·m (12.2 kgf-m, 88.5 ft-lb) Trailing link — rear axle housing: 80 N·m (8.2 kgf-m, 59.0 ft-lb) 2. Install the bracket - parking brake cable. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 3. Install the rear wheels and lower the vehicle. Tightening torque: 120 N·m (12.2 kgf-m, 88.5 ft-lb) |
Installation
1. Clean the mating surfaces of the transmission case, transfer case and extension case.2. Apply a coat of grease to the taper roller bearing (transfer case side) of transfer driven gear and the roller rolling surface of the taper roller bearing (extension case side).Grease:NICHIMOLY N-130 or equiva ...