Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION

When replacing the body integrated unit, install the starter relay (a) to the relay holder.

NOTE:

Make sure that there are no differences from the contents of the current settings after installation. Read Current Data > LIST

1. Install the body integrated unit (fuse & relay box).

Tightening torque:

Relay & fuse box: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Install the panel - knee guard.

Tightening torque:

7 N·m (0.7 kgf-m, 5.2 ft-lb)

3. Install the cover assembly - instrument panel LWR driver.

4. Connect the ground terminal to battery sensor. NOTE

Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Low ...

Note
1. WHEN REPLACING THE BODY INTEGRATED UNIT1. Check and record the current setting. Registration Body Integrated Unit > OPERATIONCAUTION:• When the body integrated unit is replaced, registration ...

Other materials:

Inspection
1. Check that the fuel pump relay has no deformation, cracks or other damages.2. Measure the resistance between fuel pump relay terminals.Terminal No.Standard1 and 21 M- or more3 and 4130.4 — 230.8 - (when 20°C (68°F))3. Connect battery positive terminal to terminal No. 3 and battery ...

© 2017-2024 Copyright www.sulegacy.com