1. SEDAN MODEL 1. Install the keyless entry control module. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the trim panel assembly - rear shelf. Rear Shelf Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL 1. Install the keyless entry control module. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the trim panel - rear apron RH. Rear Quarter Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Removal
NOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. V-BELT1. When working on the vehicleNOTE:When working on the vehicle, perform the following steps also.(1) Remove the V-belt covers.2. Attach the tool to the V-belt tensioner assembly, and rotate the to ...