1. Before installation, check the following items. • Cable is free from deformation such as fray. • Grease is applied sufficiently to cable joints. If grease is insufficient, add it as necessary before assembling the cable. 2. Install the remote assembly - door. 3. Install the trim panel - rear door. Door Trim > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Dtc p0011 "a" camshaft position - timing over-advanced or system performance bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCE ...