CAUTION: Make sure that the harness grommet is securely installed. If not properly installed, this may cause leaks. 1. Install the rear lock button and the switch - opener rear gate. 2. Install the garnish assembly - rear gate. Rear Gate Garnish > INSTALLATION Tightening torque 4.5 N·m (0.4 kgf-m, 3.3 ft-lb) 3. Install the trim panel - rear gate. Rear Gate Trim > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Disposal
1. REAR GATE DAMPER STAYCAUTION:Gas is colorless, odorless, and harmless. However, gas pressure may spray cutting powder or oil. Be sure to wear dust-resistant goggles.1. Cover with a vinyl sack as shown in the figure.(1)Stay ASSY - rear gate(2)Vinyl sackNOTE:Prevent the vinyl sack from being caught ...