Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Trunk lid latch and actuator assembly / Installation

1. Install the lock assembly - trunk lid.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Connect the ground terminal to battery sensor. NOTE

3. Install the trim panel - trunk lid. Trunk Room Trim > INSTALLATION

Inspection

1. LATCHCheck if the latch operates normally.If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the lock assembly - trunk lid.2. ACTUATOR1. Check door lock operationC ...

Trunk opener button

...

Other materials:

Diagnostic procedure with phenomenon
PhenomenonCheck ItemNote1CRUISE switch is not turned ON. (CRUISE indicator does not illuminate.) Or the cruise control is cancelled without CRUISE switch operation.(1) Perform cruise cancel conditions diagnosis.Perform the diagnosis according to displayed cancel code.(2) Perform the real-time diagno ...