Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
CAUTION: • Be careful not to damage the sensor. • Do not apply excessive force to the sensor harness. 1. Install the front ABS wheel speed sensor. Tightening torque: Front ABS wheel speed sensor: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the front wheels. Tightening torque: Front wheel: 120 N·m (12.2 kgf-m, 88.5 ft-lb) 3. Lower the vehicle. NOTE: Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering. 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. CHECK WITH SUBARU SELECT MONITOR1. Connect the Subaru Select Monitor to data link connector.NOTE:For detailed operation procedures, refer to “Application help”.(1) On «Start» display, ...
Other materials:
Dtc p0977 shift solenoid "b" control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Gear is not changed. (No down-shift)1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.CAUTION:Start work after ATF cools down.1) Turn the ignition switch to OFF. ...
