Refer to “Front Hub Unit Bearing” for installation, because the front magnetic encoder is integrated with the hub unit COMPL - front axle. Front Hub Unit Bearing > INSTALLATION |
Installation
1. PULSATION DAMPER RH1. Install the pulsation damper RH to the fuel injector pipe RH.NOTE:Use a new gasket.Tightening torque:21.6 N·m (2.2 kgf-m, 15.9 ft-lb)2. Install the fuel pipe protector RH.Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)3. Install the air intake boot. Air Intak ...