Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Vdc off switch / Installation

1. Install the VDC OFF switch.

2. Install the cover assembly - instrument panel LWR driver.

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 8Switch OFF1 M- or moreSwitch ONLess than 1 -2. Apply battery voltag ...

Vdc sequence control

...

Other materials:

Removal
1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Shift the range select lever to “N” range.3. Remove the extension case. Extension Case > REMOVAL4. Remove the parking pawl shaft, return spring and parking pawl.(A)Parking pawl shaft(B)Ret ...