Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Disassembly

NOTE:The accelerator pedal cannot be disassembled. ...

Inspection

1. CHECK ACCELERATOR PEDAL SENSOR AREA (METHOD WITH CIRCUIT TESTER)1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the ECM. Engine Control Module (ECM) > REMOVAL Engine Control ...

Other materials:

Installation
1. CLUTCH SWITCH1. Install the clutch switch.2. Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.Clutch pedal full stroke A:130 — 135 mm (5.12 — 5.31 in)Tightening torque:T: 8 N·m (0.8 kgf-m, 5.9 ft-l ...